| EN
  • Contact Phone
    (852) 3104 3323 (Main) / (852) 9015 1700 (Sales)
    (852) 3104 3326 (Fax)
  • Address
    3/F, Ray Centre, 88 Hung To Road,
    Kwun Tong, Hong Kong
               

PRODUCTS

2E11-110-RX (PoE PSE site)

AETEK EPo2(Ethernet & Power over 2 wires) kit allows you to connect PoE IP devices such as Intercom/Access Control/Speaker/Touch Screen Station/VoIP/sensor/camera over in-wall 2 wires of doorbell wire, telephone line or 1-pair UTP/STP to Ethernet network. You don’t have to configure anything, and you only need one AETEK EPo2 unit at each end of PoE IP device(PD) & Ethernet Switch port.

In addition to reuse 2-wire cable, AETEK EPo2 is designed to extend PoE range & data rates far beyond 100meters/100 Mbps limits even using 2-wire thinness 26AWG cable.

Category: Tag:

Description

AETEK EPo2(Ethernet & Power over 2 wires) kit allows you to connect PoE IP devices such as Intercom/Access Control/Speaker/Touch Screen Station/VoIP/sensor/camera over in-wall 2 wires of doorbell wire, telephone line or 1-pair UTP/STP to Ethernet network. You don’t have to configure anything, and you only need one AETEK EPo2 unit at each end of PoE IP device(PD) & Ethernet Switch port.

In addition to reuse 2-wire cable, AETEK EPo2 is designed to extend PoE range & data rates far beyond 100meters/100 Mbps limits even using 2-wire thinness 26AWG cable.

Features

– Uses telephone line, doorbell wire or 1-pair UTP/STP to connect PoE IP devices
– Eliminates extra intermediate PoE switch
– Plug-and-Play deployments
– Reuses in-wall 2 wires infrastructure
– Optional 19’’ 4-bay rack mount chassis(CH-100)

Datasheet

2E11-110-RX Datasheet-190401_compressed